How To Select The Right Type of Plywood For Roofing
When you are roofing a structure, you need to select the right type of plywood. Various types of plywood have different traits that establish their viability for roofing. Constructing or restoring a roof is no small project – it can be dangerous and very time-consuming. That’s why it’s vital to know what you’re doing before getting started. One of the most important conclusions you’ll make when roofing is which type of plywood to use. Each kind of plywood has its own set of pros and cons, so picking the wrong one could lead to disaster. In this article, we’ll teach you what to search for when choosing plywood for your roof and give you a few tips on how to get the most out of your expenditure. Let’s get started!
1. Being familiar with Plywood Grades There are three main types of plywood: interior, exterior, and marine. Interior plywood is meant for indoor use only and is not suitable for roofing. Exterior plywood is designed for outdoor use and is often used in construction undertakings. Marine plywood is a specialized type of exterior plywood that is designed to fight rot and moisture. It is often used in boatbuilding. When deciding on plywood for your roof, you need to ensure that it is rated for exterior use. Otherwise, it will not be able to resist the elements and could break down over time.
2. Think about The Fullness Of The Plywood The fullness of the plywood you select will depend on the pitch of your roof. A pitch is the angle of the roof, and it is measured by the number of inches the roof rises for every 12 inches it runs. For example, a 3/12 pitch roof has 3 inches of rise for every 12 inches of run. A steep-pitched roof will need heavier plywood than a low-pitched one. Generally speaking, you will require at least 1/2-inch thick plywood for a low-pitched roof and at least 5/8-inch thick plywood for a steep-pitched roof.
3. Select The Right Kind Of Plywood There are two types of exterior plywood: CDX and OSB. CDX plywood is made from tiers of cross-laminated veneer and is held together with waterproof adhesives. It is the most common type of plywood used in construction and is suitable for most roofing projects. OSB, or Oriented Strand Board, is made from smaller sized pieces of wood that are concentrated in various directions and then pressurized and glued together. It is less common than CDX plywood but is growing in popularity due to its value for money.
4. Look at The Cost Of The Plywood Plywood comes in a variety of prices, so it’s critical to consider your budget when selecting a sheet. CDX plywood is typically the most pricy, followed by OSB, with marine plywood being the most expensive kind of all. That said, the price of plywood can vary depending on the thickness, grade, and type of wood used. Be sure to compare prices from various vendors before making your final decision.
5. Get The Right Tools For The Job Once you’ve chosen the perfect plywood for your roofing project, it’s time to get the right tools for the job. Make sure you have a durable ladder that can support your weight, as well as a helper to assist you with the project. You’ll also need a saw and some basic carpentry equipment to cut the plywood to size. If you’re not confident in your ability to install the plywood yourself, it’s best to hire a professional roofer to do the job for you. So, what is the best plywood for roofing?
The answer to that question really depends on your specific requirements and choices. If you are looking for an cost-effective solution that will get the job done, then standard construction-grade plywood should work just fine. However, if you are searching for something with a bit more of a premium feel, then you may want to look at using higher quality plywood like birch or oak. Whichever kind of plywood you choose, be sure to contact us so that we can help you install it properly and ensure its longevity. https://themocracy.com/what-type-of-plywood-is-used-for-roofing/